Exposure Adjustment; Adjusting The Exposure Manually; Exposure Lock - Canon Elura 100 Instruction Manual

Adjusting the Exposure Manually

Recording
Adjust the exposure when a backlit subject becomes underexposed, or overexposed due
to bright light. Exposure cannot be adjusted in the
Available only in the

Exposure Lock

1. Set the mode switch to
2. If the joystick guide does not appear on
screen, press (
3. Push the joystick (
the exposure lock mode.
• [EXP] on the joystick guide will be displayed in light
blue and the exposure adjustment indicator and the neutral value "±0" appear on the
screen.
• When you operate the zoom during exposure lock, the brightness of the image may
change.

Exposure Adjustment

During exposure lock:
4. Adjust (
To return to automatic exposure, push the joystick (
exposure adjustment indicator will disappear and [EXP] will turn white again.
5. Push the joystick (
• When you operate the zoom during exposure lock, the brightness of the image may
change.
• The adjustment range depends on the brightness at the time you locked the
exposure.
• The manual exposure setting will reset to auto exposure when you turn the
camcorder off or change the recording program.
48
and
.
) to display it.
) towards [EXP] to enter
) the brightness of the image as necessary.
) towards [BACK] to save the exposure setting.
Fireworks recording program.
modes.
Joystick
Mode switch
) towards [EXP] once more. The
EXP
BACK