Sony nxcam HXR-NX3E Operating Manual page 72

Connecting a monitor or a TV (Continued)
Output resolution
Output resolution depends on the settings of [HDMI].
NTSC model
HD/DV [HDMI] setting
HD
DV
PAL model
HD/DV [HDMI] setting
HD
DV
b Notes
• It is recommended that you use an authorized cable with HDMI logo or a Sony HDMI cable.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the movies.
• Images and sounds may not be reproduced correctly on some monitors or TVs.
• Do not connect the output jacks of the camcorder with the output jacks of the monitor or TV. A
malfunction may be caused.
• When the frame rate in [
the output signal is converted to interlace or progressive through pull-down conversion.
72
1080p/480i
720p/480i
1080i/480i
480p
480i
1080p/480i
720p/480i
1080i/480i
480p
480i
1080p/576i
720p/576i
1080i/576i
576p
576i
1080p/576i
720p/576i
1080i/576i
576p
576i
REC FORMAT] is set to 24p or 30p (NTSC model) or 25p (PAL model),
Output resolution
HDMI OUT VIDEO OUT
1080p No output
720p No output
1080i No output
480p No output
480i No output
480i No output
480i No output
480i No output
480p No output
480i No output
Output resolution
HDMI OUT VIDEO OUT
1080p No output
720p No output
1080i No output
576p No output
576i No output
576i No output
576i No output
576i No output
576p No output
576i No output