Radio Operations - Hyundai H-CDM8054 Instruction Manual

Radio operations

BAND selection
Press SCH/LOUDBAND button repeatedly to select your desired radio band in RADIO mode: FM1, FM2, FM3, MW1 (AM1), MW2
(AM2). Each band can store 6 preset stations, for a total of 30 preset memory stations.
Tuning
Press FWD/REW buttons to enable automatic search of a radio frequency. Press and hold the buttons to enable manual seeking mode.
"Manual seeking" will appear on the display. Now press FWD/REW buttons repeatedly to change the frequency step by step. If both
buttons have not been pressed for several seconds, the unit will return to auto seek mode and "Auto seeking" appears on the display.
Automatic store/scanning
Automatic memory storing
Press and hold AS/PS button; "Auto storing" will appear on the display. The radio will search from the current frequency and checks
the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number
button.
Program scanning
Press AS/PS button to scan preset stations. And the corresponding station number P1-P6 will flash on the display.
Scan
Press 2/SCN button to enter scan mode, the unit will scan to higher frequency station and keep on each station for several seconds.
Station storing
Press any of number buttons (1-6) to select a station, which had been stored in the memory. Press and hold this button for several
seconds, current station is stored into the number button.
RDS (Radio Data System) function
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area,
the following service is not available, either.
14