Advertisement
Available languages
Available languages
5. Install the Side Panels
Carefully lift the side panel and place the expander jamb over the wall jamb.
From inside the shower insert a Phillips screwdriver tip through the adjustment jamb block holes
(2), and turn the adjustment blocks counterclockwise until the blocks firmly contact the expander
jamb of the side panel wall frames. This ensures that the side panel rests firmly on the receptor
ledge.
Repeat the procedure for the other side panel.
Check the side panel for plumb.
1032629-2-B
Adjustment
Block
Wall Jamb
Shower
Receptor
Adjustment Block Hole
Expander
Jamb Side
Column Side
6
Kohler Co.
Advertisement
