Lazio Mirrored End Table Parts List Please review all parts and hardware before disposing of any packaging. Before beginning assembly, separate each type of hardware. Carefully study the diagrams below and check that you have all parts indicated. Call Customer Service if missing hardware. Using the incorrect hardware will cause damage.
Page 3
Lazio Mirrored End Table Assembly Instructions Assemble with parts upside-down. Connect Upper Rails (C) and Bottom Rails (D) to Leg Frames (B) by hand. Figure 1 Notice: Do not fully tighten Bolts until assembly is complete. Use Short Bolts (2), Spring Washers (4), and Flat Washers (5) to attach assembled base from Figure 1.
Page 4
Place Top Frame (A) upside-down on a soft working surface. Place assembled base onto Top Frame (A). Attach base with Long Bolts (3), Spring Washers (4), and Flat Washers (5). Fully tighten all Bolts (3) using Allen Wrench (1). Figure 3 Carefully turn table upright.
Page 5
Tip: If table is not level, adjust levelers on legs by hand as shown. Now your Lazio Mirrored End Table is ready to use! Figure 5 Page | 5...
90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas), Mon-Fri 9am – 4pm CST, or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
Need help?
Do you have a question about the CK481200TX and is the answer not in the manual?
Questions and answers