802.1X Authentication - Edimax EW-7415PDn User Manual

2-7-5 802.1x Authentication

You can enable 802.1x user identification (based on RADIUS user authentication server) by
checking 'Enable 802.1x Authentication' box when you select 'Disable' or 'WEP' as
encryption type, and the following message will be displayed:
Here are descriptions of every setup item:
Use internal
MD5/PEAP
RADIUS Server
Enable 802.1x
Authentication
RADIUS Server IP
address
RADIUS Server
Port
RADIUS Server
Password
After you finish with setting, please click 'Apply', and the following message will be
displayed:
When you see this message, the settings you made is successfully save. You can click
Uses built-in RADIUS Server (refer to next
Section) instead of external RADIUS server. If you
check this box, the value of internal RADIUS
server fields will be ignored.
Enable or disable the use of 802.1x user
authentication.
Please input the IP address of RADIUS
authentication server here.
Please input the port number of RADIUS
authentication server here. Default value is 1812.
Please input the password of RADIUS
authentication server here.
50