Iv-3-1-3-1 No Authentication / Additional Authentication - Edimax OAP1300 User Manual

SSID Selection
Broadcast SSID Enable or disable SSID broadcast.
Wireless Client
Isolation
Load Balancing Load balancing limits the number of wireless clients
Authentication
Method
IV-3-1-3-1
When "No Authentication" is selected in "Authentication Method", extra
options are made available in the next line:
Additional
Authentication
"No additional authentication" is not recommended as anyone can
connect to your device's SSID.
Select a SSID to configure its security settings.
Enable: the SSID will be visible to clients as an available Wi-Fi
network.
Disable: the SSID will not be visible as an available Wi-Fi
network to clients – clients must manually enter the SSID in
order to connect. A hidden (disabled) SSID is typically more
secure than a visible (enabled) SSID.
Enable or disable wireless client isolation.
Wireless client isolation prevents clients connected to the
access point from communicating with each other and
improves security. Typically, this function is useful for
corporate environments or public hot spots and can prevent
brute force attacks on clients' usernames and passwords.
connected to an SSID. Set a load balancing value (maximum
100).
Select an authentication method from the drop down menu
and refer to the appropriate information below for your
method.
No Authentication / Additional Authentication
Select an additional authentication method from the drop
down menu or select "No additional authentication" for no
authentication, where no password/key is required to
connect to the access point.
For other options, refer to the information below.
50