Control Board Connections - Mighty Mule MM136 Installation Instructions Manual

Control Board Connections

NOTE:
If your control board doesn't look like any of these diagrams, please call Technical Service at 1-800-543-1236 or 850-575-4144 for
additional support .
Mighty Mule MM371, MM372, MM571,
MM572 and TS 571 Control Boards
Connect #2 wire from the RELAY
OUTPUT terminals on the keypad to
the COM terminal on the gate opener
control board.
#2
Mighty Mule 500 & 502 Control Boards
COM COM
Connect the #2 wire from
the RELAY OUTPUT
terminals on the keypad to
one of the COMMON
terminals on the opener
control board.
MM271 Control Boards
Connect #1 wire from the
RELAY OUTPUT terminals
on the keypad to the
CYCLE terminal on the
gate opener control board.
Connect #1 wire from the
RELAY OUTPUT terminals
on the keypad to the
CYCLE terminal on the
gate opener control board.
#1
GRN BLK RED
RECEIVER
Connect the #1 wire from
RELAY OUTPUT terminals on the
keypad to the CYCLE terminal on
the opener control board.
#1
#2
Connect #2 wire from
the keypad to the COM
terminal on the gate
opener control board.
#2
#1
Mighty Mule 360 Control Board
LINK
Connect #1 wire from the
RELAY OUTPUT terminals
on the keypad to CYCLE
terminal on the gate opener
control board.
MM560, MM562, MM660, PRO3000XLS Series,
and PRO4000XLS Series Control Boards
Connect #2 wire from the
RELAY OUTPUT terminals
on the keypad to the COM
terminal on the gate opener
control board.
MM262, MM362, MM462, FM202,
PRO-SW2000XLS Series Control Boards
Connect #1 wire from the
RELAY OUTPUT terminals
on the keypad to CYCLE
terminal on the gate opener
control board.
#1
10
RECR
Connect #2 wire from the RELAY
OUTPUT terminals on the keypad
to the COMMMON terminal on
the gate opener control board.
#2
#1
RECEIVER
CONTROL INPUTS
RCVR.
Connect #1 wire from
the RELAY OUTPUT terminals on
the keypad to CYCLE terminal on
the gate opener control board.
#1
#2
FIRST OPR.
Connect #2 wire from the
keypad to the COMMON
terminal on the gate opener
control board.
#2
ALM
SECOND OPR.