Table of Contents
Advertisement
Ethernet Power Injector Specifications
WatchGuard Part #
Specification
AC Input Voltage Rating
Output Voltage
Output Power
PoE Power Class
Ethernet Interfaces
Region-specific
Adapter Plugs
Indicator
Temperature
Humidity
Dimensions
Weight
AC Power Adapter
You can also power the WatchGuard AP device with an optional AC power adapter.
WatchGuard Part #
Output Voltage
Use only the WatchGuard AC power adapter for this AP device model.
See the AP102 Quick Start Guide for detailed steps to remove the rear cover, and connect the power
adapter to the AP102 device.
Hardware Guide
Ethernet Power Injector
WG8568
IEEE 802.3af/at
100 to 240VAC
56V
15.4W
3
In: RJ-45 for 10/100 Mbps
Out: RJ-45 for 10/100 Mbps and 56V DC
Voltage on pins 4-5 (+) and 7-8 (-).
US, EU, UK, AU
Green — Valid PoE load detected and connected.
Flashing Green/Red — Invalid load connected.
Red — Fault detected.
Operating 0 to +40°C
Storage -25 to +65°C
Operation 5 to 90%
L = 80mm (3.15in)
W = 45mm (1.77in)
H = 33mm (1.29in)
95g (3.35oz.)
AC Power Adapter
WG8575
12VDC 1.25A
Hardware Specifications
7
Advertisement
Table of Contents
