Advertisement
OWNERS MANUAL & QUICK START GUIDE
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
BLACKOUT HALF RACK - 2.2M
21-0711
PRODUCT WEIGHT
MAX USER WEIGHT
MAX USER
MAX TRAINING WEIGHT
DIMENSIONS
SAFE WORKING ZONE
PRODUCT SPECIFICATION
-
-
-
-
-
1200mmx1100mmx2266mm
-
2312mmx2820mmx3076mm
#MADEINBELFAST
88kg
125kg
1
350kg
Advertisement
Table of Contents
Related Manuals for BLK BOX BLACKOUT 21-0711
Summary of Contents for BLK BOX BLACKOUT 21-0711
- Page 1 BLK BOX BLACKOUT HALF RACK - 2.2M 21-0711 PRODUCT SPECIFICATION 88kg PRODUCT WEIGHT 125kg MAX USER WEIGHT MAX USER OWNERS MANUAL & QUICK START GUIDE 350kg MAX TRAINING WEIGHT DIMENSIONS 1200mmx1100mmx2266mm NOTE : PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
- Page 2 WARNING SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PRO- TECTIVE EQUIPMENT (PPE).
- Page 3 ASSEMBLY BOLT 1QTY BACK CM (21-0602), 2QTY BASE FRAME (21-0572) AND 6QTY BRACE PLATE (20-0472) WITH BOLTS ASSEMBLY AS SHOWN. BOLT ASSEMBLY FOR EACH HOLE: 10.0008 10.0019 x2 10.0024 INSERT 1QTY UPRIGHT (21-0573) INTO TAB SLOTS ON BASE FRAME (21-0572) AND ATTACH USING BOLT ASSEMBLIES AS SHOWN BELOW.
- Page 4 PLACE 1QTY HALF RACK(20-0543) BETWEEN 2 UPRIGHTS AND ATTACH WITH BOLT ASSEMBLIES AS SHOWN. REPEAT ON OPPOSITE SIDE. BOLT ASSEMBLY FOR EACH HOLE: 10.0008 10.0019 x2 10.0024 BOLT 1QTY SINGLE BAR(20-0543) TO UPRIGHTS AND ATTACH WITH BOLT ASSEMBLIES AS SHOWN. REPEAT ON OPPOSITE SIDE. BOLT ASSEMBLY FOR EACH HOLE: 10.0008...
- Page 5 ATTACH 1 QTY FOOT PLATE (20-0412) USING BOLT ASSEMBLIES AS SHOWN. REPEAT ON OPPOSITE SIDE. FOLLOW 4 STEP GUIDE BELOW FOR FLOOR MOUNTING. BOLT ASSEMBLY FOR EACH HOLE: 10.0008 10.0019 x2 10.0024 TIGHTEN ALL BOLT ASSEMBLIES TO 30NM. ENSURE UPRIGHTS ARE PLUMB AND ALL SINGLE BARS ARE LEVEL. FLOOR MOUNTING USING HAMMER DRILL, DRILL A 10MM WIDE HOLE, 90MM HAMMER SLEEVE ANCHOR BOLT INTO THE HOLE.
- Page 6 1:1 SCALE FASTENERS M10x80 SLEEVE ANCHOR 10-0031 M10x90 BOLT 10-0008 M10 FLAT WASHER NYLOCK NUT 10-0019 10-0024 FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT: www.blkboxfitness.com/pages/terms-conditions GET IN TOUCH: TEL: 028 9045 4123 EMAIL: info@blkboxfitness.com DISCOVER MORE AT: www.blkboxfitness.com #MADEINBELFAST...
Need help?
Do you have a question about the BLACKOUT 21-0711 and is the answer not in the manual?
Questions and answers