BMW M4 COUPE Owner's Manual page 282

CONTROLS
Via iDrive
Turning on
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation"
5. "Start now"
Via BMW display key
Turning on
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap the icon or the
4. "Activate now"
5. "Start"
Turning off
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap the icon or the
4. "Stop"
Display
Icon Description
Symbol on the climate con‐
trol display.
Flashing: the pre-ventilation
is switched on.
Departure time
Principle
Different departure times can be set to ensure a
comfortable interior temperature in the vehicle at
the time of departure.
282
Climate control
icon.
icon.
Online Edition for Part no. 01405A38097 - VI/21
▷ One-time departure time: the time can be
set.
The system is switched on once.
▷ Departure time with weekday: time and day
of the week can be set.
On the desired weekdays, the system will be
switched on before the set departure time.
The departure time is preselected in two steps:
▷ Set departure times.
▷ Activate departure times.
A minimum of 10 minutes should pass between
setting/activating the departure time and the
planned departure time to allow a sufficient pe‐
riod of time for the climate control.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation"
5. "Departure plan"
6. Select the desired departure time.
7. Set the departure time.
8. Select day of the week, if needed.
9. "OK"
Via BMW display key
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap the icon or the
4. Select the desired departure time.
5. Set the departure time.
6. Select day of the week, if needed.
7. "OK"
icon.