BMW M4 COUPE Owner's Manual page 236

CONTROLS
General information
When the systems in the vehicle, e.g., Speed
Limit Info, detect a change of the speed limit, this
new speed value can be applied for the following
systems:
▷ Manual Speed Limiter.
▷ Cruise control.
▷ Active Cruise Control with Stop&Go function
ACC.
The speed value is suggested as the new de‐
sired speed to be applied. To apply the speed
value, the corresponding system must be acti‐
vated.
Safety information
Warning
The system cannot serve as a substitute for the
driver's personal judgment in assessing the
traffic situation. Based on the limits of the sys‐
tem, it cannot independently react to all traffic
situations. There is a risk of accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where appropri‐
ate.
Warning
The set speed can be incorrectly adjusted or
called up by mistake. There is a risk of accident.
Adjust the set speed to the traffic conditions.
Watch traffic closely and actively intervene
where appropriate.
236
Driver assistance systems
Online Edition for Part no. 01405A38097 - VI/21
Overview
Buttons on the steering wheel
Button Function
Accept suggested speed manually.
Rocker switch:
Set speed, refer to Cruise Control.
Turning Speed Limit Assistant
on/off
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. If necessary, "Driving"
5. "Speed Limit Assistance"
6. "Speed limits"
7. Select the desired setting:
▷ "Adjust manually": detected speed limits
can be applied manually.
▷ "Show anticipation": current and upcom‐
ing speed limits are displayed in the in‐
strument cluster without being applied.
▷ "Show current limit": current speed limits
are displayed without being applied in the
instrument cluster.
▷ "Off": depending on the national-market
version, Speed Limit Info and Speed Limit
Assistant will be turned off.
Displays in the instrument
cluster
A message is displayed in the instrument cluster
when the system and a driver assistance system
are activated.