BMW M4 COUPE Owner's Manual page 220

CONTROLS
Settings
Using the button
1. Press the button.
2. "M Traction Control"
3. Select the desired setting:
▷ OFF/Level 0: support switched off. Signifi‐
cant wheel spinning possible.
▷ Level 10: maximum support. Slight wheel
spinning possible.
Via iDrive
It is possible to configure the required program
for buttons M1 or M2.
1. "CAR"
2. "M menu"
3. "Configure M1" or "Configure M2"
4. Deactivate DSC, if needed.
5. "M Traction Control"
6. Select the desired setting.
The setting is immediately applied with active
M1 or M2 configuration.
To activate the desired configuration with the se‐
lected settings, press the corresponding button
on the steering wheel:
▷
▷
220
Driving stability control systems
Online Edition for Part no. 01405A38097 - VI/21
Displays in the instrument
cluster
Icon Description
Symbols light up:
DSC is deactivated.
DSC indicator light also blinks:
M Traction Control is also regu‐
lating the driving power.
M Traction Control level display.
Icon is blinking: M Traction Con‐
trol level is changed.
M Drift Analyzer
Principle
With activated M Drift Analyzer, the active M
xDrive program is: "2WD".
The M Drift Analyzer detects and evaluates
when the vehicle is moved in the drift.
General information
For safety reasons, the use of the M Drift Ana‐
lyzer is only permitted outside of public road traf‐
fic and under suitable ambient conditions.
Higher mechanical and thermal loads while drift‐
ing lead to increased wear. This wear is not cov‐
ered by the warranty. Check the tire condition
and the tire tread depth before driving off.
The data can be recorded as individual drifts or
as total distance in a drift session.
M Traction Control assists the driver depending
on the setting.
Additional information: