BMW M4 COUPE Owner's Manual page 104

CONTROLS
Functional requirements
▷ At least one driver profile has been created.
▷ A driver profile or the guest profile is active.
▷ At least one driver profile has an assigned
ConnectedDrive account.
Accessing the menu for the valet
parking mode
Via the switch-off screen
After switching off drive-ready state the switch-
off screen will be displayed. Select the entry for
the valet parking mode on the switch-off screen.
Via the display bar at the upper edge
of the Control Display
1. Tip the Controller up.
2. "Valet parking mode"
Via the vehicle settings
1. "CAR"
2. "Settings"
3. "General settings"
4. "Valet parking mode"
Activating the valet parking
mode
General information
Before activating the valet parking mode, a PIN
must be set up to be able to deactivate the valet
parking mode at a future time.
The procedure for entering the PIN varies de‐
pending on the active driver profile.
Driver profile with PIN
A PIN has been stored for the active driver pro‐
file.
It is not necessary to enter another PIN.
1. "Lock tailgate as well"
104
Opening and closing
Online Edition for Part no. 01405A38097 - VI/21
The trunk lid will be locked and disconnected
from the central locking system.
2. "Activate now"
Driver profile without PIN
A PIN must be assigned to the driver profile.
1. "PIN"
2. Enter PIN.
3. "Lock tailgate as well"
4. "Activate linkage"
5. "Activate now"
Guest profile
The guest profile is the active driver profile.
A PIN must be entered.
1. "PIN"
2. Enter PIN.
3. "Lock tailgate as well"
The trunk lid will be locked and disconnected
from the central locking system.
4. "Activate now"
This PIN can be used once to deactivate the
valet parking mode for the active guest pro‐
file.
Deactivating valet parking mode
General information
The lock screen of the valet parking mode is dis‐
played on the Control Display.
The deactivation of the valet parking mode de‐
pends on which driver profile is selected on the
lock screen.
Driver profile with PIN
Regardless of which driver activated the valet
parking mode, a driver can deactivate the valet
parking mode by entering his/her PIN.
1. Select driver profile.
2. Enter the assigned PIN for the driver profile.