BMW M4 COUPE Owner's Manual page 226

CONTROLS
DSC Dynamic Stability Control is switched on, if
necessary.
Turning off
Depending on the equipment version,
press the relevant button on the steer‐
ing wheel.
The displays turn off. The stored set speed is
deleted.
Pausing cruise control
Interrupting manually
When active, press the button.
Interrupting automatically
The system is automatically interrupted in the
following situations, for example:
▷ When braking manually.
▷ Manual transmission: the clutch pedal is de‐
pressed for a few seconds or released while a
gear is not engaged.
▷ Manual transmission: if the gear engaged is
too high for the current speed.
▷ Steptronic transmission: gear lever position D
is disengaged.
▷ M Dynamic Mode MDM is activated or DSC
Dynamic Stability Control is deactivated.
▷ The Dynamic Stability Control (DSC) adjusts.
226
Driver assistance systems
Online Edition for Part no. 01405A38097 - VI/21
Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted.
When the system is switched on, the current
speed is maintained and stored as the set speed.
The stored speed is displayed on the speedom‐
eter.
DSC Dynamic Stability Control is switched on, if
necessary.
The speed can also be stored by pressing a but‐
ton.
Press the button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the road
is clear.