BMW M4 COUPE Owner's Manual page 145

After each switch between Sequential mode and
Drive mode, the last program selected is an ac‐
tive.
If the drive-ready state is switched on after the
vehicle has been in the idle state and is in Drive
mode, the D1 program is activated.
Programs
Pro‐ Drive mode
gram
Efficient driving.
D1/S1
Fast driving.
D2/S2
Sporty driving.
D3/S3
Selecting a program
Via the rocker switch on the selector lever
Press the rocker switch repeatedly until
the desired program is displayed in the
instrument cluster.
Via iDrive
It is possible to configure the required program
for buttons M1 or M2.
1. "CAR"
2. "M menu"
3. "Configure M1" or "Configure M2"
Sequential
mode
Comfortable shift‐
ing operations.
Sporty, fast shift‐
ing operations.
Maximum shifting
speed, Launch
Control.
Online Edition for Part no. 01405A38097 - VI/21
Driving
4. "Transmission"
5. Select the desired program
▷ "D1" to "D3": Drive mode.
▷ "S1" to "S3": sequential mode.
The setting is immediately applied with active
M1 or M2 configuration.
To activate the desired configuration with the se‐
lected settings, press the corresponding button
on the steering wheel:
▷
▷
Display in the instrument cluster
The selected program corre‐
sponds to the number of illumi‐
nated fields.
Electronic unlocking of the
transmission lock
General information
Electronically unlock the transmission lock to
maneuver vehicle from a hazardous area.
Unlocking is possible, if the starter can crank the
engine.
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from rolling
away.
Engaging selector lever position N
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter must
audibly start. Hold the Start/Stop button
pressed.
3. With your free hand, press and hold the se‐
lector lever in selector lever position N, until
selector lever position N is displayed in the in‐
strument cluster.
CONTROLS
145