capsula JR5X Instruction Manual page 9

English
Never secure your child nor the seat with a two-point
seat belt.
If you only secure your child with a two-point seat
belt, it can be seriously injured or even die.
Only to be assembled by adults!
1.2 Preparation
The capsula® JR5X may be placed on all passenger seats of the vehicle
that are equipped with a three-point-vehicle-belt.
The child seat must not be positioned on a vehicle seat, which only has a
lap belt (O), example given the centre back seat of cars with three seats
in the back.
Three-point-vehicle-belt configuration
The tree-point-belt of a vehicle is made of 4 parts: the lap belt (O),
the diagonal belt (N), the belt latch (P) and the belt buckle (Q).
13
2. Installation in the car
Pull the lever on the front of the seat.
When the lever is released, you can pull out the
Isofix-device on the rear side of seat.
The pullout Isofix-device simplifies the installation.
Before you place the capsula® JR5X on the car
seat, if required, attach the two supplied
installation aids (IH) to the ISOFIX anchors (IA) in
your car. You can find the ISOFIX attachment
points between the seat and the backrest of your
car.
Now put the two ISOFIX terminals (IK) to the
ISOFIX anchors (IA) on the car and click them into
place until you hear a »click«.
Please check with the help of the marks on BOTH
SIDES, if the seat is properly connected with the
two ISOFIX anchors (IA) of the car.
English
GB
14