capsula JR5X Instruction Manual page 10

English
GREEN: the terminal is fixed
CORRECTLY.
RED: the terminal is fixed NOT
CORRECTLY, please correct it!
Only a proper fixing of BOTH
TERMINALS guarantees the
provided hold of the seat
and the protection of your child in the car!
Pull the lever on the front of the seat.
When the lever is released, you can move the Booster
gently backwards until the Booster is positioned clo-
sely to the backrest of the car seat.
Place the capsula® JR5X on the car seat, set your
child in the Booster and secure your child with the
lap (O) and diagonal belts (N)of the
three-point-vehicle-belt.
15
L+R
L+R
CHECK
Now fasten the three-point
seat-belt with an audible
»click« sound.
Finish the fixing of the belts
by fixing the belt block
anchor (D)and fastening
oft the belt padding. only
if delivered with. This piece
makes sure the diagonal
belt (N) lies firmly over the
child's shoulder and
optimizes the belt guidan-
ce. Thread the belt block
anchor (D), which is fixed
on the back side of the seat
part, onto the diagonal belt
(N) at the height just behind
the child's shoulder. The
string to fix the belt block
anchor to the seat must
lead behind the back
of the child.
Make sure that the lap belt runs under the fixation
lugs (C) on both sides and that the diagonal belt
leads only under the fixation lugs (C) on the side of
the belt buckle (Q).
English
GB
16