Connecting The Ac Adapter To The Port Replicator; Switching On The Notebook Via The Port Replicator - Fujitsu LIFEBOOK U728 Operating Manual

Connecting the AC adapter to the port replicator

3
1
When the notebook is connected to a port replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the monitor
which was last used for output is saved as a setting. This profile will be loaded as
soon as the notebook is connected to a port replicator of the same type.

Switching on the notebook via the port replicator

Fujitsu
► Connect the AC cable to the AC adapter (1).
► Plug the AC cable into the power outlet (2).
► Connect the AC adapter cable to the DC
jack (DC IN) of the port replicator (3).
2
► Press the ON/OFF button on the port
replicator to switch on the notebook.
The power-on indicator of the port
replicator lights up.
Working with the notebook
53