Connecting The Ac Adapter To The Port Replicator; Switching On The Notebook Via The Port Replicator - Fujitsu LIFEBOOK E736 Operating Manual

Connecting the AC adapter to the Port Replicator

3
1
Power Outlets will vary from country to country, see chapter
travelling in other countries ", Page
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.

Switching on the notebook via the port replicator

Fujitsu
► Connect the power cable to the
► Plug the power cable into the power
► Connect the AC adapter cable to the DC
2
19.
► Press the Power ON/OFF button on the port
Working with the notebook
AC adapter (1).
outlet (2).
jack (DC IN) of the Port Replicator (3).
"When
replicator to switch the notebook on.
The power-on indicator of the Port
Replicator lights up.
51