Connecting The Ac Adapter To The Port Replicator; Switching On The Notebook Via The Port Replicator - Fujitsu LIFEBOOK E549 Operating Manual

Working with the notebook

Connecting the AC adapter to the port replicator

3
1
When the notebook is connected to a port replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the monitor
which was last used for output is saved as a setting. This profile will be loaded as
soon as the notebook is connected to a port replicator of the same type.

Switching on the notebook via the port replicator

50
► Connect the power line (1) to the network
adapter provided for use with the device,
see chapter
► Plug the AC cable into the power outlet (2).
► Connect the AC adapter cable to the DC
jack (DC IN) of the port replicator (3).
2
► Press the ON/OFF button on the port
replicator to switch on the notebook.
The power-on indicator of the port
replicator lights up.
"Technical data", Page 84.
Fujitsu