CDA CI326 Installation - Use - Maintenance page 34

Fitting the furniture door
The machine is supplied with a fitting template that aligns with the top
of the fascia door and has arrows cut out of it that point toward the
door top.
NOTE: If this template is aligned with the top of the décor door, the
resultant position will align the décor door top with the top of the
machine fascia.
The required height of the door top edge above the fascia panel,
and hence the gap between décor door and worktop, can only
be determined by the fitter after the final height adjustment of the
machine has been determined. The final positioning of the template
is therefore at the discretion of the fitter. The furniture door should
be fitted to the casing of the washing machine using the hinges
supplied.
Fix the magnetic catch assembly to the front of the washing machine
and to the furniture door.
ARROWS
POINT TO TOP
OF DOOR
TEMPLATE
DOOR
34
HINGE
POSITIONS