Table of Contents
Advertisement
Pump filter
The pump filter system helps to prevent the ingress of lint or foreign
objects into the drain pump, reducing the risk of damage. The pump
filter should be cleaned regularly, every two to three months at least.
To avoid injury, do not carry out this operation when the wash
water is at a temperature over 30ºC. Disconnect the appliance
from the power supply first.
To clean the filter:
•
Unplug the appliance.
•
Open the kickplate cover by
undoing the single screw then
sliding the cover to the left to
release it from its clips.
•
Release the drain hose and let it
swing forward.
•
Place a container under the
drain hose to collect the flow of
remaining water from the machine.
•
Pull the bung from the end of the
drain hose and let it drain. It may
be necessary to reseal this hose
and empty the container to prevent
the container from overflowing.
•
Replace the bung.
(Continued on page 23)
22
Slide cover left
Advertisement
Table of Contents
