Table of Contents
Advertisement
display will show "P--2", a further press of the "Extra Rinse" button
selects the maximum of 3 extra rinses with the display showing "P--3".
The "Extra Rinse" light is illuminated and flashes during the
programme, "P--1/2/3" is displayed, alternating with the remaining
programme run time.
Intensive
Pressing the "Intensive" button before starting a programme selects
this function. This increases the washing time during the main wash
stage of the programme and is ideal for washing dirty loads.
Rinse hold
This function pauses the programme before the final rinse water is
set to drain. This holds the clothes in water to prevent creasing. The
indicator will flash when the rinse hold function is in progress. To start
the final spin cycle, press the rinse hold button again. The indicator
will switch off and the final spin programme will start.
Start / Pause
Press the "Start / Pause" button to start the selected wash programme
running, the indicator light stays on. If this is pressed again while
the machine is running a programme the washer will pause and the
indicator light will flash.
Key lock
The lock function ensures that the programme will not be affected if
any buttons are pressed accidentally.
The lock function should be activated after the wash programme has
been selected together with any extra functions.
15
Advertisement
Table of Contents
