CDA CI326 Installation - Use - Maintenance page 28

the event of a fault.
Failure Code
E1
E2
E4
E8
F3
F4
F7
FA
FC0/FC1
/FC2
End
UNb
cLrF
28
Probable failure
• Drainage error, water is
not fully drained within
6 minutes
• Lock - error.
• Water level not reached
after 7 minutes. at the
latest.
• Drain hose is
self-syphoning.
• Water protective
level - error.
• Temperature sensor
- error
• Heating error.
• Motor - error.
Water level sensor error.
• Abnormal
communication error.
End of wash cycle.
After last rinse cycle
finishes laundry not
completely balanced.
Too many detergent suds
(over-foaming) detected.
The process to be done
• Clean pump filter.
• Check drain hose installation
• Shut the door properly.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Unplug the machine, close the water tap and
contact CDA Customer Care.
Not a machine fault.
• Check and balance laundry load in the drum.
Reduce the load.
Run an extra rinse cycle (more if necessary).
Once cleared use less, or a di erent, detergent.