CDA CI326 Installation - Use - Maintenance page 14

Integrated washing machine
Table of Contents

Advertisement

Extra functions
Extra functions can be selected once the programme has been set.
To select any extra function, press the required extra function button.
The programme table on page 17 shows the functions available for
each programme. The programme time shown on the display will
reduce or increase, according to the extra functions selected.
Delay timer
A delay of up to 24 hours can be added to the end time in half hour
increments to allow the wash programme to finish at a convenient
time. The delay time is to the end of the wash programme not the start
of the programme.
The "Delay Timer" function is not available for the "Spin" programme.
To set the delay timer:
Press the "Delay Timer" button.
Pressing the "Delay Timer" button again increases the delay by 30
minutes for each press, up to the maximum of 24 hours.
Once the required time delay is shown on the display, the washing
machine will set after approximately three seconds delay.
Extra rinse
This function adds up to 3 extra rinse cycles to the programme,
which is ideal for large loads and garments belonging to people
with sensitive skin. Please note: this function will increase the water
consumption.
Press the "Extra Rinse" button once to select one extra rinse, the
display will show "P--1".
Press the "Extra Rinse" button again to select 2 extra rinses, the
14

Advertisement

Table of Contents
loading

Table of Contents