Installing The Sim Card And Battery - Mio A702 User Manual

1.2

Installing the SIM Card and Battery

After applying for an account with a mobile phone service provider, you will
be provided a SIM (Subscriber Identification Module) card. This card
contains your mobile phone account details, contacts that can be stored and
any additional services to which you have subscribed.
You must install a SIM card before you can use the phone feature.
1. Push the battery lock upward to release the back cover.
2. Push the SIM card holder to the left then upward to open it. Slide the
SIM card into the holder (note the orientation of the card). Press the SIM
car holder and then push it to the right to lock it into place.
3. With its label facing out, insert the two projecting parts on the battery
into the holes in the battery compartment, and then fit the battery into the
compartment.
If you need to remove the battery, use your finger to push on the edge of
the battery and then pull on the ribbon to lift the battery out of the
compartment. DO NOT use screwdrivers or metallic tool edges to
extract the battery from the device as they may damage and irreversibly
alter the battery's behavior.
4. Replace the back cover: direct the bottom edge of the back cover to the
locking latches on the device and close the back cover.
Getting Started
1-7