Table of Contents
Advertisement
The GPRS/EDGE connection settings for several mobile phone operators
have been built into the device. Simply select the proper connection setting
for your service provider.
Programs
1. Tap
2. Select your country and service provider, and tap the
ok
.
Starting and Ending a GPRS/EDGE Connection
To start the connection, simply use the desired program. For example, switch
to Internet Explorer Mobile and browse to a web page. Your device will
automatically connect.
To end the connection, tap the
Disconnect
tap
.
Wireless Network Connection
Your device has a built-in wireless network module. As long as you are in a
wireless LAN (WLAN) environment, you can connect to the network
without physical cables.
Turning On and Off the Wi-Fi Radio
By default, the Wi-Fi radio is turned off. To turn on the Wi-Fi radio, follow
this procedure:
1. Tap the Wireless Manager section on the Today screen.
Wi-Fi
2. Tap the
3. To turn off the Wi-Fi radio, follow the above procedure, but tap the
box to change the Wi-Fi radio status from
Connecting to a Wireless Network
1. Turn on the Wi-Fi radio. (See "Turning On and Off the Wi-Fi Radio"
previously in this chapter.)
2. By default, your device will automatically detect the available wireless
networks.
10-2
GPRS Settings
box to change the Wi-Fi radio status from
.
or
icon on the Navigation bar and then
Available
Apply
soft key
Off
Available
to
Wi-Fi
Off
to
.
Getting Connected
.
Advertisement
Table of Contents
