Product Assembly - KitchenAid 5KSM7580X Use And Care Manual

PRODUCT ASSEMBLY

1
Turn the Stand Mixer to OFF (0) and then
unplug.
3
Locating pin
To attach the Bowl: Place Bowl Lift Lever
in down position. Fit bowl supports over
Locating Pins. Press down on back of bowl
until bowl pin snaps into spring latch.
5
Rotate lever to straight-up position.
Bowl must always be in raised, locked
position when mixing.
W11456999A_01_EN.indd 7 W11456999A_01_EN.indd 7
Spring latch
2
Place Bowl Lift Lever in down position.
4
To Attach the Accessory: Slip Flat Beater
on Beater Shaft and press upward as far
as possible. Turn beater to right, hooking
beater over the pin on shaft.
Pin
7
12-08-2020 14:32:45 12-08-2020 14:32:45