Table of Contents
Advertisement
®
R&S
NRT2
1
Safety and Regulatory Information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the
on page 5.
Intended use
Combined with a supported R&S NRT‑Zxx directional power sensor, the R&S
NRT2 base unit is intended for power and reflection measurements in develop-
ment and for monitoring and maintenance purposes. The supported
R&S NRT‑Zxx directional power sensors are listed in the data sheet. Observe the
operating conditions and performance limits stated in the data sheet.
Target audience
The target audience is developers and technicians. The required skills and expe-
rience in power and reflection measurements depend on the used operating con-
cept. While manual operation is suitable for beginners, remote control requires
expertise in power and reflection measurements.
Main applications are continuous monitoring of transmitter systems and power
measurements with digital modulation. A profound knowledge of the intended
application and test setup is recommended.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
● In
Chapter 1.1, "Safety
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
● Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
Getting Started 1430.0573.02 ─ 03
Instructions",
on page 5. The same information is
Safety and Regulatory Information
Chapter 1.1, "Safety
Safety Instructions
Instructions",
5
Advertisement
Table of Contents
