Time-Setting Options; Setting The Timer; Cleaning; Suitable Cleaning Agents - Siemens VG011DBR0M Instruction Manual

Hide thumbs Also See for VG011DBR0M:
Table of Contents

Advertisement

Time-setting options

en
OTime-setting options
S etting the timer
T i m e - s e t t i n g o p t i o n s
The short-term timer has no effect on how the oven
works. The short-term timer duration can be set from
5 to 90 minutes. The appliance must be in standby
mode to do this.
Use the time selector to set the required cooking time.
An audible signal sounds once the time has elapsed.
To stop the timer counting down, set the
Note:
remaining time to zero.
12
DCleaning
W ith good care and cleaning, your appliance will retain
C l e a n i n g
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.

Suitable cleaning agents

Observe the following information to ensure that the
different surfaces are not damaged by using the wrong
type of cleaning agent.
Do not use any of the following
on the oven:
Any harsh or abrasive cleaning agents,
Cleaning agents with a high concentration of
alcohol,
Hard scouring pads or sponges,
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Area

Cleaning

Appliance exterior
Stainless steel
Hot soapy water:
front
Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Control panel
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Door panels
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
Door handle
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If descaler comes into contact with the door han-
dle, wipe it off immediately. Otherwise, any stains
will not be able to be removed.

Advertisement

Table of Contents
loading

Table of Contents