Optional Remote Receiver (Millivolt) - Majestic VDY24/18 Installation And Operating Instructions Manual

Vented gas log set
Table of Contents

Advertisement

"Duzy" Gas Log Sets – The Look and Feel of a Real Wood Fire
REMOTE RECEIVER INSTALLATION
DO NOT PLACE THE REMOTE IN THE
FIREPLACE IF ANY OF THE FOLLOWING
CONDITIONS APPLY:
The floor of the fireplace is recessed below the fireplace
opening. See Warnings on Page 6.
The fireplace has glass doors which when open reduces
the opening width to 1Z\x" or more below the stated mini-
mum dimensions within the homeowner's manual.
The floor of the fireplace is sheet metal without a brick
covering.
The remote receiver is attached but does not physi-
cally fit inside the fireplace with 2" clearance to the side
wall.
Pilot
Figure 54 -
Attach Remote Receiver Wires
to Terminals
Failure to follow instructions exactly will
void warranty and could cause receiver
to melt.
Failure to place remote receiver in any
location within the fireplace other than
recommended location will void warranty
and could cause receiver unit to melt.
Majestic• VDY 24/18, VDY 30 Gas Log Heater Installation/Owner's Manual • 32D1999 • Rev A • 08/16
26
THTP
TP
TH
Optional Wall Switch
or Remote Receiver
FP2857
millivolt wiring
OPTIONAL REMOTE RECEIVER - MILLIVOLT
INSTALL REMOTE RECEIVER
Connect wires according to remote receiver instructions.
The female terminals should be connected to factory
attached male terminals which are located on right hand
side of the burner. Figure 54
NOTE: Do not let wires touch grate and/or burner.
For more details, see remote receiver instructions.
Millivolt
Valve
NOTE: Battery life decreases as temperature increases.
Keep remote receiver in a low temperature area outside
of fireplace to prolong battery life.
FP2857
Switch

Advertisement

Table of Contents
loading

Table of Contents