Table of Contents
Advertisement
Figure 2
3.3 Packing List
Please check lists if open the package.
No.
Range Hood
1
3
Aluminum Foil Air Duct
5
Note: When using the hood, install the cup on the filter mesh.
3.4 Installation Notice
● Installation and circuit setting must be operated by professionals with experiences and non-professionals shall not
assemble, disassemble and repair range hood.
●Don't connect power before installation,it may cause electric shock.
●If your kitchen is in decoration state, please do not expose the range hood outside since construction material, dust,
paint, coating and the gases they volatile will corrode the surface of range hood and the surface will be tarnished.
Therefore, it's suggested to assemble the range hood after decoration.
●
If gas hob needs to be removed before installing range hood, please turn off gas valve firstly.
●Don't install range hood on the wooden or other flammable wall. The wall of installation range hood shall be on
the nonflammable, enough stable, smooth and level surface.
● Range hood may have very sharp edge, please wear protective gloves while moving the range hood for
installation, cleaning or maintenance.
●When drilling holes on the wall, the electric wire buried in the wall shall be avoided to prevent from fire.
●Range hood shall not be installed too high, nor shall it be disturbed by external air flow so that the fume suction effect
will not be influenced.
●Please retain installation space for hood while fabricating cupboard so as for the care and maintenance .
●Please keep the hood body level while installing the machine.
●Please use single phase socket with earthing, which shall be well earthed.(Water pipe grounding is not reliable.The
grounding of gas piping may cause the danger of fire and explosion.)
●Use appointed accessories for installation or range hood may fall down and cause danger.
● If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard. Don't stretch, change ,tie, or press supply cord, or it may cause fire
or electric shock.
●If finish installation, clean range hood firstly, then connect power and test run.
Hole size of the exhaust pipe Ø200
Ceiling hole sizes( Projection size of the hood top)
Quantity
Name
Hook
2 pieces
No.
1 piece
2
1 piece
4
6
6
Wall
Name
Operation Manual
Outer outlet
Oil Cup
Quantity
1 piece
1 pair
1 piece
Advertisement
Table of Contents
