Haier HH-S900C Installation Manual/User Manual
  1. Manuals
  2. Brands
  3. Haier Manuals
  4. Ventilation Hood
  5. HH-S900C
  6. Installation manual/user manual

Haier HH-S900C Installation Manual/User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Range Hood
model

Advertisement

Table of Contents
loading

Related Manuals for Haier HH-S900C

Summary of Contents for Haier HH-S900C

  • Page 1 Range Hood model...
  • Page 3 IMPORTANT! SAVE THESE INSTRUCTIONS...
  • Page 5 INTRODUCTION Thank-you for purchasing a Haier rangehood. This user guide explains the features and functions, and will help you get the most out of your rangehood. We hope you enjoy your new rangehood.

  • Page 7: Important Safety Instructions

    If installation is performed by a qualified person, the product should be tested to confirm proper operation, and the correct use of the product explained to the use If the power supply cord is damaged, it must only be replaced by your Haier trained and supported service technician or qualified person.
  • Page 8 Range Hood model...
  • Page 9 12 2 （ ）...
  • Page 10 Actual product dimensions may vary by ± 2 mm.

  • Page 12: Installation Instructions

    INSTALLATION INSTRUCTIONS Installation WARNING! This product is heavy and requires two persons for installation. WARNING! Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards Installation position 1. The room should be well ventilated without flammable, explosive or corrosive materials or articles.
  • Page 13 ABOUT YOUR RANGEHOOD ： ： ： ：...
  • Page 14 OPERATING INSTRUCTIONS – CONTROL PANEL （ ） （ ）...

  • Page 15: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Cleaning and maintenance preparation 1. Before cleaning or maintaining the range hood, be sure to remove the power plug ． Please wear rubber gloves when cleaning or maintaining, in case the metal parts hurt people quickly. When cleaning and maintenance, take off the parts and put Oil cup them gently to avoid deformation.
  • Page 16 CLEANING AND MAINTENANCE Disassembly control switch Unscrew the 2 countersunk head screws for the fixed switch cover plate with a crewdriver, and take out the switch cover plate ;Then unscrew the 2 screws of the fixed switch to remove the control switch.(FIG.

  • Page 17: Troubleshooting

    TROUBLESHOOTING...
  • Page 18 TROUBLESHOOTING cover cover...

  • Page 19: Manufacturer's Warranty

    MANUFACTURER’S WARRANTY...

Table of Contents