Elation KL FRESNEL 8 FC PO User Manual page 11

FIXTURE INSTALLATION
CLAMP INSTALLATION
This device should be mounted by attaching a mounting clamp and junior pin to the mounting yoke.
A safety cable loop is also located on the rear face of the fixture. When mounting the fixture to a
truss or any other suspended or overhead installation, be sure to secure an appropriately rated
clamp (not included) to the clamp attachment point and attach a separate SAFETY CABLE of the
appropriate safety rating to the safety cable rigging point.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working
load limits, understanding the installation material being used, and periodic safety inspection of all
installation material and the fixture itself. If you lack these qualifications, do not attempt to perform
the installation yourself. Improper installation can result in bodily injury.
11