Operation - Eaton FT1455-L3 Operating Instructions Manual

Step 4: Operation
Place the hose, tube or pipe against the nozzle to insure a good
air seal. Depress the trigger until the projectile exits the opposite
end of the hose, tube or pipe you are cleaning.
(See Figure 8).
Figure 8
Step 5:
Inspect projectile for contamination after firing through hose,
tubing or pipe. Several projectiles may need to be fired to
thoroughly remove contaminates. (See Figure 9).
Figure 9
EATON FT1455-L3 Hand Launcher Operating Instructions E-HOAI-CC003-E May 2015
5