Step 5: Operation - Eaton FT1455-L2 Operating Instructions Manual

Step 5: Operation

Place the hose, tube or pipe against the nozzle to insure a good
air seal. Depress the trigger until the projectile exits the opposite
end of the hose, tube or pipe you are cleaning. (See Figure 9).
Figure 9
Step 6:
Inspect projectile for contamination after firing through hose,
tubing or pipe. Several projectiles may need to be fired to
thoroughly remove contaminates. See Figure 10).
Figure 10
EATON FT1455-L2 Hand Launcher Operating Instructions E-HOAI-CC002-E May 2015
5