Water Connec Ons - Insignia MY810L Assembly & Fi Ng Instructions

Shower Water Connec ons
You have five features fi ed within the shower, all are connected
via the rubber reinforced pipes supplied at the rear of the shower.
These are: Foot Massage * Back Massage Jets * Overhead Mon-
soon Shower Head * Bath filler * Hand Held shower.
Hand held
Massage
Jets
Foot Spa Massage
Rearrange length of hoses according to what you need as these are
posi oned for transit packing only.
Inside the cabin you will now need to check the logos for each
func on correspond. If correct leave as they are. If incorrect, move
knob to correspond with correct posi on. To do this, flip out the
blue/red decal on the knob. Inside loosen the screw withdraw the
knob and turn to correct posi on then replace.
Make sure when you ghten the jets you double check everything
for leaks and also the jets. While you are checking everything as a
prudent measure why not loosen the jets on the back column and
seal with a bead if silicone.
For the latest fi ng instruc ons please visit www.insigniarange.co.uk
29
Now connect the massage jets linked through seat back. Earlier
you posi oned these to fit the back rest, make sure they are ght
and will not leak. Now taking the pipes cut to correct size
Overhead
rain shower
Bath filler
These are a very ght fit so warming up pipe first assists greatly the
snug fit it needs to be when pushed fully home. Now clip each
ghtly like all pipe connec ons (shown without for be er picture)
and you require the pa ern in picture above right. You will no ce
in this configura on the top le is the feed from the shower con-
trol panel and nothing comes from bo om le as this is blanked.
For the latest fi ng instruc ons please visit www.insigniarange.co.uk
TIP: Get a cup of boiling
water and dip the ends
of the pipe into the cup
to so en the pipe. Be
careful not to scold
yourself.
30