Page 1
HY-PTK-100Exp 505mm 3M Velco M4*14mm Flat-Heat cross-Screw (For the Installation of Controller) Twin Core Cable In Red and Black 1000mm/2*2.5mm² Twin Core Cable in Red and Black with MC4 Power Your Green Life! 4120 Valley Blvd Walnut, CA 91789, USA www.ACOPower.com...
HY-PTK-100Exp User’s guide After receiving the solar panel kit, please check if all accessories are included in the package and prepare to test your kit: 1. Locate a sunlit area clear from hanging branches or obstacles. 2. Unclip the two latches (2, Table 1) on the side of the unit and fold two panels outward. Extend the two support legs (4, Table 1) to desired length and lock the stands in position.
Page 3
HY-PTK-100Exp Method 2: Use your solar generator To test if the solar panel is working with a solar generator with a built-in charge controller, connect the MC4 adapters that came with your solar generator and plug it in to the MC4 cables of the solar panel directly (14a and 14b, Table 1). Turn your solar generator on and it should start charging from the solar panel.
Page 4
HY-PTK-100Exp What are you going to use it for 1. Charge solar generators 1.1. Charge 12V Solar Generator with built-in Charge Controller Step 1: understand your solar generator and prepare the MC4 adapter for your solar generator Step 2: Disconnect MC4 Connectors and let it to be a solar panel with MC4 connectors Step 3: Use your MC4 Adapter to charge your solar generator 2.
Limited Warranty shall be suspended without liability for the period of delay reasonably attributable to such causes. Register your warranty with ACOPWER, please visit: https://www.acopower.com select “Warranty Registration”. Thank you for your business and support! ACOPOWER Team technical support: support@acopower.com...