rosseto EZ-PRO EZP2760 Manual

SETTING UP YOUR PRODUCT

1. Carefully remove all parts from packaging and poly bags.
2. Make sure you have all parts listed before discarding packaging.
• 1 Assembled EZ-PRO™ C4L Metal Base with Pole and Detachable Tray
• 4 EZ-PRO containers each with:
™
a. Lid
b. 1, 2, 3 & 4 tsp. Portioned Scoops and Funnel
c. PRO-6W Silicon Portion Wheel (1 oz.)
d. PRO-6SM Portion Wheel (1 tbsp.)
e. Container
f. Handle
3. Place the stand on a flat surface facing you.
4. Make sure the pole is securely attached to the base and place tray on the stand.
5. Fill an EZ-PRO™ container with desired product and seal with the lid.
6. On the back of each container are 2 hooks that fit snugly onto the allotted
notches on the stand. Install a container by securing both hooks on the upper
and lower notches. Make sure it locks into place.
7. Repeat steps 5 thru 7 for the remaining containers.
8. Dispense as you please!
NEED ASSISTANCE?
EZ-PRO™ Carousel Dispenser
Model: EZP2760 EZ-PRO™ C4L Stainless Steel
TRAY
STAND
Please contact our customer service support at (847) 763-1215
and we'll be happy to assist with any assembly questions,
comments, or concerns.
ROSSETO
Visit our website att www.rosseto.com
b. ITEM #:
EZP028
e. CONTAINER SHELL:
ITEM #: EZC038
POLE
2 hooks on the back of the EZ-PRO
container latch on to the upper and
lower notches on the stand.
® 3714 Jarvis Avenue, Skokie, IL 60076
a. ITEM #: EZL006
d. ITEM #:
c. ITEM #:
EZP022
EZP021
f. ITEM #: EZH010
TM