rosseto EZ-PRO 1W Quick Start Manual

EZ-PRO™ 1W/3W/5W (EZ501-N/EZP2906-N/EZP2890-N)

SETTING UP YOUR PRODUCT

1. Carefully remove all parts from packaging and poly bags.
•
Depending on your model, you will have 1/3/5 NSF-certified EZ-PRO™ containers each with:
a. Lid
3 interchangeable portion wheels:
•
PRO 6-Wing Silicon 1 oz. Portion Wheel
PRO-6SM 1 tbsp.
d. EZP007 1 tsp. Scoop-It
•
2 interchangeable nozzles:
e. Regular Nozzle
Narrow Nozzle
f.
g.
Container
h.
Label Holder
i.
Handle
j.
Handle Clip
k. PRO Fresh Lid
• 1/3/5 easy-to-install back snap system (optional accessory)
• 1 EZ-PRO™ metal bracket
2.
Make sure you have all parts listed above before discarding packaging.
3.
Consult your contractor about what mounting hardware (not included) to use, depending on the type of wall you have.
4.
Mount EZ-PRO™ metal bracket where desired, making sure it is affixed securely to the wall.
5.
Check the portion wheels installed and make sure you use the right fit for each product you are dispensing.
NOTE: If you need to change any portion wheels, follow steps 2 thru 5 on the disassembly instructions on Page 2.
6. Fill an EZ-PRO™ container with desired product and seal with the lid.
NEED ASSISTANCE?
b
ITEM # EZP004
Wheel with Funnel
TM
e
ITEM # EZM005
ROSSETO
c ITEM # PRO6-SM
d ITEM # EZP007
NOTE:
Please remove the
clear plastic nozzle
when using EZP007 or
f
ITEM # EZM004
any of the Scoop-It
Portion Wheels.
Please contact our customer support at (847)763-1215 and we'll be
happy to assist with any assembly questions, comments or concerns.
3600 W. Pratt Avenue. Lincolnwood, IL 60712
®
a
ITEM # EZL006
TM
g
CONTAINER SHELL:
ITEM # EZC008
h ITEM # EZM006
i
ITEM # EZH012
Visit our website at: www.rosseto.com
j
ITEM # EZM057
k
ITEM # EZL009