Table of Contents
Advertisement
RM-701
BB Troubleshooting and Manual Tuning Guide
GPS settings for Phoenix
GPS Self Tests
Prerequisites
The GPS tests runnable from the ME Test tab of the Testing → GPS Control window can be
Note:
run in parallel by selecting more than one test from the Tests list.
A flash adapter (or a phone data cable) connected to a PC with Phoenix service software is required.
Steps
1. Place the phone in the flash adapter or connect a data cable to the phone.
Phoenix service software.
2. Start
Bus Method (FBUS or USB) and Port from the Connections box.
3. Select the
4. Choose File → Scan Product.
5. From the Operating Mode drop-down menu, set to Local.
6. Choose Testing → Self Tests.
Self Tests window, check the following GPS test set:
7. In the
• ST_GPS_TEST
8. To run the test, click Start.
Self Tests: Basic functionality of GPS ASIC and I2C, HOST_REQ, and RESET_ENA pin connections.
Issue 1
Figure 20 GPS production test pads (top side)
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Page 3 – 65
Advertisement
Table of Contents
Troubleshooting
