RM-645
BB Troubleshooting and Manual Tuning Guide
GPS layout and basic test points
Figure 14 GPS layout and basic test points
VBat, ASIC internal LDO voltages, clocks and one test pad J6200 (activity on this pad indicates the GPS is
operating) are available as shown in figure "GPS layout and basic test points" above.
GPS settings for Phoenix
GPS control
Context
Use the following to test GPS using Phoenix.
Steps
1. Start Phoenix service software.
2. From the File menu, select Scan Product and check that the correct product version is displayed.
Issue 1
COMPANY CONFIDENTIAL
Page 3 – 45
Copyright © 2010 Nokia. All rights reserved.