Table B-3. Front Panel Categories (continued)
Category Name
Time/Date Set
Remote Interface Parameters
Computer Interface (CIF)
Parameters
Controller Software Version
Elapsed Hours
Flash Programming Access
Code
Table B-3 Note:
* Only available once the Factory Authorized Access Code has been entered.
** Available in FAAM and unit in Standby.
D
.01023245 R
.L
OC
EV
Purpose
User Set Heater Time Delay
12/24 Hour Format
Hour:Minute
Set Month
Date
Year
US Daylight Savings
Mode (If RMTPNL is displayed, the other selections under this menu
will not be available.)
Device Address
Baud
Parity
Protocol
Check Byte Type
CR Enable
LF Enable
Accept Bad Check Byte
Loopback Test
Installation Test
Device Address
Baud
Parity
Protocol
Check Byte Type
CR Enable
LF Enable
Accept Bad Check Byte
Loopback Test
Installation Test
Beam On Elapsed Time Meter
Heater Elapsed Time Meter
THIS DOCUMENT IS THE PROPERTY OF COMMUNICATIONS & POWER INDUSTRIES.
REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED
CHPA SERIES
B-11