Related Manuals for ETEKCITY ESB4074C
Summary of Contents for ETEKCITY ESB4074C
- Page 1 Smart Body Weight Scale Model: ESB4074C User Manual Questions or Concerns? (855) 686-3835 • support@etekcity.com...
-
Page 2: Table Of Contents
Table of Contents Package Contents Specifications Safety Information Function Diagram Display Diagram Before First Use VeSync App Setup Using the Smart Scale Maintenance Common Display Codes Troubleshooting FCC Statement Warranty Information Customer Support... -
Page 3: Package Contents
Specifications Weight Capacity 400 lb / 28 st / 180 kg Increments 0.1 lb / 0.05 kg Weight Units lb / st / kg Platform Tempered Glass Battery 2 x 1.5V AAA Batteries (Pre-Installed) Auto-Off 15 seconds Dimensions 11.8 x 11.8 x 1 in / 302 x 302 x 24 mm Operating System iOS 10.0+ or Android™... -
Page 4: Safety Information
READ AND SAVE THESE INSTRUCTIONS Safety Information Please read and follow all instructions and safety guidelines in this manual. Medical • This scale should not be used to diagnose or treat any medical condition. • Scale data should not be used as a substitute for medical advice from a healthcare professional. - Page 5 • To weigh safely and accurately, stand with your feet shoulder- width apart while on the scale. Do not stand on the edge of the scale or jump on the scale. • Avoid standing on the scale for a long period of time, or when you are not weighing yourself.
-
Page 6: Function Diagram
Function Diagram Weighing Platform Display Anti-Skid Padding Unit Switching Button Battery Compartment... -
Page 7: Display Diagram
Display Diagram Weight Measurement Bluetooth Icon ® Weight Units... -
Page 8: Before First Use
Before First Use Open the battery compartment on the underside of the scale. Remove the included AAA batteries. Remove the plastic insulator strip from the battery compartment. Replace the batteries. Follow the guidelines in the battery compartment to match the + and – terminals. Slide 1.5V - AAA 1.5V - AAA... -
Page 9: Vesync App Setup
VeSync App Setup Note: Due to app updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in-app instructions. To download the VeSync app, scan the QR code or search “VeSync”... - Page 10 Open the VeSync app. If you already have an account, In. To create a new account, tap Sign Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest account. With a VeSync account, you can also allow your family and friends to use your smart body weight scale.
- Page 11 Creating a User If you are a new user, you will need to enter physical information before weighing yourself for the first time so the scale can calculate your body metrics. Follow the in-app instructions to create a user profile. Note: •...
-
Page 12: Using The Smart Scale
Using the Smart Scale Note: • To switch between pounds (lb), stone (st), and kilograms (kg), press the unit switching button on the underside of the scale. • You can also open the VeSync app and select the weight unit in the Device Settings menu. - Page 13 Step on, then step off the scale and wait for the LCD display “ 0.0 ” to show before weighing. Stand on the scale until the display flashes several times, showing your final measurement. [Figure 1.2] If you’ve set up your smart scale in the VeSync app, your results (weight and BMI) will show in the app.
-
Page 14: Maintenance
Maintenance Clearing the Smart Scale If the scale has been moved or flipped upside down, it must be cleared to ensure accurate results. Place the scale on a hard, flat surface. Step on the scale until digits appear on the display, then step off. - Page 15 Cleaning the Smart Scale • Use a slightly damp cloth to clean the surface of the scale, followed by a soft, dry cloth to wipe away any remaining moisture. • Do not use chemical or abrasive cleaning agents to clean the scale. Replacing the Batteries The display will show “...
-
Page 16: Common Display Codes
Common Display Codes Bluetooth Connection No Bluetooth Connection Clearing Overload Change Battery... -
Page 17: Troubleshooting
Troubleshooting The scale doesn’t turn on. • Check if the batteries are properly installed. If using the scale for the first time, remove the plastic insulator strip from the battery compartment. Information flashes on the display and then disappears. • The batteries are low and may need to be replaced. The smart scale doesn’t connect with the VeSync app. - Page 18 My scale will only measure my weight, not my BMI. • Set up your smart scale in the VeSync app and enter all of the required personal information, including your height. Your weight will show on the scale display, and your weight and BMI will show on the app. •...
- Page 19 Android and Google Play are trademarks of Google LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth ® SIG, Inc. and any use of such marks by Etekcity Corporation is under license. Other trademarks and trade names are those of their respective owners.
-
Page 20: Fcc Statement
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 21: Warranty Information
2 years from the date of original purchase. Etekcity agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase. - Page 22 This warranty does not extend to products purchased from unauthorized sellers. Etekcity’s warranty extends only to products purchased from authorized sellers that are subject to Etekcity’s quality controls and have agreed to follow its quality controls. All implied warranties are limited to the period of this limited warranty.
-
Page 23: Customer Support
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@etekcity.com Toll-Free: (855) 686-3835 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your invoice and order ID ready before contacting Customer Support. - Page 24 Connect with us @Etekcity 01.00_D_21H31_us...