Related Manuals for ETEKCITY ESF28 Series
Summary of Contents for ETEKCITY ESF28 Series
- Page 1 Smart Fitness Scale Model: ESF28 Series User Manual Questions or Concerns? Mon–Fri, 9:00 am–5:00 pm PST/PDT support@etekcity.com • (855) 686-3835...
-
Page 2: Table Of Contents
Table of Contents Package Contents Specifications Safety Information Function Diagram Display Diagram Before First Use VeSync App Setup Using the Smart Scale Maintenance Common Display Codes Troubleshooting FCC Statement Limited One-Year Warranty Customer Support... -
Page 3: Package Contents
Specifications Weight Capacity 400 lb / 180 kg / 28 st Increments 0.2 lb / 0.05 kg Weight Units lb / kg / st Platform Tempered glass Battery 3 x 1.5V AAA batteries Auto-Off 30 seconds Dimensions 11.8 x 11.8 x 1 in / 30 x 30 x 2.5 cm Operating System iOS 9.0+ or Android™... -
Page 4: Safety Information
READ AND SAVE THESE INSTRUCTIONS Safety Information Please read and follow all instructions and safety guidelines in this manual. Medical • This scale should not be used to diagnose or treat any medical condition. • Scale data should not be used as a substitute for medical advice from a healthcare professional. - Page 5 • The glass platform is slippery when wet. Always make sure the platform and your feet are dry before stepping on for measurement. • Place the scale on a hard, flat surface to avoid tipping. • To weigh safely and accurately, stand with your feet shoulder- width apart while on the scale.
-
Page 6: Function Diagram
Function Diagram Weighing Platform Display Anti-Skid Padding Battery Compartment... -
Page 7: Display Diagram
Display Diagram Weight Measurement Bluetooth Icon ® Weight Units... -
Page 8: Before First Use
Before First Use Open the battery compartment on the underside of the scale. Remove the included AAA batteries. Remove the plastic insulator strip from the battery compartment. Replace the batteries. Follow the guidelines in the battery compartment to match the + and – terminals. 1.5V - AAA 1.5v - AAA 1.5V - AAA... -
Page 9: Vesync App Setup
VeSync App Setup Note: Due to app updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in- app instructions. To download the VeSync app, scan the QR code or search “VeSync”... - Page 10 Open the VeSync app. If you already have an account, tap In. To create a new account, tap Sign Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest account. With a VeSync account, you can also allow your family and friends to use your smart fitness scale.
- Page 11 Creating a User If you are a new user, you will need to enter physical information before weighing yourself for the first time so the scale can calculate your body metrics. Follow the in-app instructions to create a user. Note: •...
-
Page 12: Using The Smart Scale
Using the Smart Scale Note: • To switch between pounds (lb), stone (st), and kilograms (kg), open the VeSync app and select the weight unit in the Device Settings menu. • To see measurements besides weight, you must connect the scale to the VeSync app (see page 9). - Page 13 Make sure your feet are dry. Place bare feet on the scale’s conductive areas. Step onto the scale. The scale will automatically turn on and start measuring your weight. Continue standing on the scale until the digits on the display flash 2 times, showing your final measurement. [Figure 1.2] If your smart scale is connected to the VeSync app, additional results (such as BMI, body fat, etc)
-
Page 14: Maintenance
Maintenance Calibrating the Smart Scale If the scale has been moved or flipped upside down, it must be calibrated to ensure accurate results. Place the scale on a hard, flat surface. Step on the scale with 1 foot until digits appear on the display, then step off. - Page 15 Cleaning the Smart Scale • Use a slightly damp cloth to clean the surface of the scale, followed by a soft, dry cloth to wipe away any remaining moisture. • Do not use chemical or abrasive cleaning agents to clean the scale.
-
Page 16: Common Display Codes
Common Display Codes Wireless Connection No Wireless Connection Calibrating Overload Change Battery... -
Page 17: Troubleshooting
Troubleshooting The scale doesn’t turn on. • Check if the batteries are properly installed. If using the scale for the first time, remove the plastic insulator strip from the battery compartment. Information flashes on the display and then disappears. • The batteries are low and may need to be replaced. The smart scale doesn’t connect with the VeSync app. - Page 18 My scale will only measure my weight, not my body fat or other metrics. • Set up your smart scale in the VeSync app. Your weight will show on the scale display, and more results will show on the app. •...
- Page 19 Apple App Store is a trademark of Apple Inc. Android and Google Play are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Etekcity Corporation is under license.
-
Page 20: Fcc Statement
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. -
Page 21: Limited One-Year Warranty
Etekcity agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase. - Page 22 This warranty does not extend to products purchased from unauthorized sellers. Etekcity’s warranty extends only to products purchased from authorized sellers that are subject to Etekcity’s quality controls and have agreed to follow its quality controls. All implied warranties are limited to the period of this limited warranty.
-
Page 23: Customer Support
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@etekcity.com Toll-Free: (855) 686-3835 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support. - Page 24 Connect with us @Etekcity...