Endress+Hauser PROFIBUS Levelflex M FMP45 Operating Instructions Manual page 10

Identification
10
70
80
90
100
100
You can fill in the options of the respective feature into the following table. The filled in options
result in the complete order code.
FMP45-
⇓
Please enter probe length in mm or inch / 0.1 inch
probe length LN → ä 14
1)
OVP = overvoltage protection
Levelflex M FMP45 with PROFIBUS PA
Type of probe:
H *Remote, cable 3m, side, center d=45 mm, centering disk d=45 mm, 316L,
pipe diamter DN50/2" + DN65/2-1/2"
I *Remote, cable 3m, side, center d=75 mm, centering disc d=75 mm, 316L,
pipe diamter DN80/3" + DN100/4"
1 Compact, basic version
3 Remote, cable 3m, top entry
4 Remote, cable 3m, side entry
9 Special version, to be specified
Housing:
A F12 Alu, coated IP68 NEMA6P
B F23 316L IP68 NEMA6P
C T12 Alu, coated IP68 NEMA6P, separate conn. compartment
D T12 Alu, coated IP68 NEMA6P + OVP
Y Special version, to be specified
Cable Entry:
2 Gland M20 (EEx d > thread M20)
3 Thread G1/2
4 Thread NPT1/2
5 Plug M12
6 Plug 7/8"
9 Special version, to be specified
Additional options:
A Basic version
B EN10204-3.1 material, wetted parts,
(316L wetted parts for rod/coax) inspection certificate
C EN10204-3.1 material, wetted parts,
(316L pressurized for rope version) inspection certificate
D *Steam boiler app.+EN10204-3.1 material, Steam boiler approval
EN12952-11/12953-9, EN10204-3.1 material, wetted parts
(316L wetted parts for rod/coax) inspection certificate
H *5-point linearity protocol
J *5-point, 3.1, NACE, 5-point linearity protocol, see additional spec.,
EN10204-3.1 material, NACE MR0175 (316L wetted parts)
inspection certificate
N EN10204-3.1 material, NACE MR0175,
(316L wetted parts) inspection certificate
U *Gas phase comp. 300mm/10" reference rod, EN10204-3.1 material, NACE
MR0175 (316L wetted parts) inspection certificate
V *Gas phase comp. 550mm/18" reference rod, EN10204-3.1 material, NACE
MR0175 (316L wetted parts) inspection certificate
Y Special version, to be specified
Marking:
1 Tagging (TAG)
2 Bus address
Complete product designation
mm
inch / 0.1 inch
1)
, separate conn. compartment
Endress + Hauser