Page 1
Instruction Manual ATV Plow Tube System Rev-L 10/15//2021...
Page 2
Manual Conventions CAUTION This manual uses the following symbols to help differentiate between different kinds of information. CAUTION indicates a potentially The safety symbol is used with a key word to alert hazardous situation which, if not avoided, you to potential hazards in operating and owning may result in minor or moderate injury.
Safety Rules WARNING CAUTION • Read this manual thoroughly before • Take care when installing PLOW SPRINGS operating your plow. Failure to follow as they will be under tension. instructions could result in serious injury • Use care when lifting components into or death.
Installation Instructions 7.3.4 1. To secure the blade to the tube system, BLADE GUSSET HOLE place the pitch bushing (Item 7.4.1) into the blade gusset hole. Secure the tube system and the blade together with carriage bolt (7.3.4), washer (7.3.3) and lock nut (7.3.2), as shown in Figure 1.
Page 5
12.5° “Figure 5” Blade Rotation Angle To attach the tube system to any KFI mounts, position the tube system with blade installed under your ATV. Raise tube attach points to the mount and line up the holes on mount plate with the holes in the tube system.
Page 6
7.4.2 7.3.7 7.3.5 7.3.1 7.3.3 7.3.2 7.4.1 7.3.4 7.3.10 7.3.9 7.3.8 7.3.6 Part # - 105000 ITEM PART# DESCRIPTION QTY. Parts List 7.3/7.4 HK-399 INCLUDES ITEMS 7.3 AND 7.4 HK-365 PUSH TUBE HARDWARE ITEM PART# DESCRIPTION QTY. 7.3.1 HNN-5Z-044-14 7/16”-14 NYLOCK NUT 105019 LIFT ARM WELDMENT 7.3.2...
2 Year Limited Warranty Western Power Sports Inc. (WPS) warrants to the original purchaser that the product is free from defects in materials and workmanship for a period of two (2) years from the original date of purchase. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.