Maintenance And Care; Contact Information - EUFAB 16469 Operating Instructions Manual

6. Operating instructions
6.1 Overview
1 Charging socket
2 Charging zone
3 LED-control lamp
4 USB connector
5 Micro-USB B connector
6.2 Use
Place the induction charger on the dashboard or centre console of your vehicle. Choose as
even a surface as possible. Pay attention to the safety precautions detailed in section 4. Plug
the Micro-USB B connector (Position 5 in the overview) of the charging cable into the socket
of the induction chargers (Position 1 in the overview).
Connect the USB connector (Position 4 in the overview) of the charging cable to a USB port
of your vehicle or with a USB vehicle charger. The induction charger is now ready for use.
Functions of LED control lamp (Position 3 in the overview):
• Flashing, 3 times, red/blue:
• Permanently lit in red:
• Permanently lit in blue:
• Flashing red:
To charge, place your smartphone on the charging zone (Position 2 in the overview) of
the induction charger. The charging process starts automatically; the LED control lamp
(Position 3 in the overview) is now lit in blue.

7. Maintenance and care

When used as directed, the induction charger is maintenance-free.
Clean the induction charger with a soft, dry cloth only. Do not use cleaning agents. Never allow
liquids to get into the housing.
8. Notes regarding environmental protection
Do not dispose of electrical devices with the household waste! Electrical devices and
electronic scrap must be collected separately and disposed of in an environmentally re-
sponsible manner for recycling. Please contact your local council or city administration
regarding disposal options for electrical devices and electronic scrap.

9. Contact information

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
Figure 1: Overview
Internal function test after switching on
Ready for charge, charging process completed
Charging process
Error
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
7