Maintenance And Care; Contact Information - EUFAB 16456 Operating Instructions Manual

INDUCTIVE CHARGER
Place the inductive charger on the dashboard or centre
console of your vehicle. Choose as even a surface as possible. Pay
attention to the safety precautions detailed in section 4. Plug the
micro-USB-B connector of the charging cable into the charging socket
of the inductive charger, Figure 1.
Connect the USB connector of the charging cable to a USB port of your
vehicle or with a USB vehicle charger. The inductive charger is now ready for use.
CHARGING
To charge, place your smartphone on the inductive charger. The charging process is started automatically.
Separate the inductive charger from the on-board network of your vehicle when the vehicle
is switched off, otherwise the battery may be drained.

7. MAINTENANCE AND CARE

The set is maintenance-free if used according to its intended purpose.
After a longer period of use, dirt and dust will collect between the mobile device and the
protective cover. This may result in abrasions and scratches on the device. For this reason,
regularly clean the rear of the device and the inside of the protective cover.
Clean the inductive charger with a soft, dry cloth only. Do not use cleaning agents.
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
Do not dispose of electrical devices with the household waste! Electrical and electronic de-
vices must be collected separately and sent for environmentally friendly recycling. Please
contact your community or city council regarding disposal options for electrical and elec-
tronic scrap.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Figure 1: Charging port
info@eal-vertrieb.com
www.eal-vertrieb.com
7